0
Košík je prázdný
0

    Infolinka: 

    +420 734 310 460

    E-mail: 

    info@t-cz.com

    Produkt je vyřazen!

    Produkt již není v naší nabídce.

    Kontaktujte prosím, manažera produktu:

    Jiří Knop

    knop@t-cz.com

    Computer Network Protector: NetProtect

    Computer Network Protector: NetProtect
     
    Výrobce
    LH Protect
    Kód
    J2830

      Podrobnosti o produktu

      Computer Network Protector: NetProtect
      View of the device
      Distinguishing features:
      • maximum impulse power: 3000 W,
      • maximum impulse voltage (peak-to-peak): 6 kV,
      • maximum current intensity of inter-wire surge (t<10 us): 132A,
      • protection of all wires of UTP/FTP cable.
      During thunderstorms electronic devices are very vulnerable to damages. Risk of over-voltage is present even in spots 1.5 km distant from the place where a lightning struck.
      The LH Protector lowers the excess voltage to the safe level, according to European standards set for this type of equipment. It allows to avoid structural damage. The device does not need power supplying and does not interrupt data transmission.
      Specifications

      - inter-wire protection voltage (threshold) 7.5 V
      - line-ground protection voltage (threshold) 500 V
      - maximum impulse voltage (peak-to-peak) 6 kV
      - maximum current intensity of inter-wire surge 132 A (10 μs)
      - maximum impulse power 3000 W
      - protected UTP/FTP pairs 1-2, 3-6, 4-5, 7-8
      - IN/OUT connectors RJ45, shielded
      - length of grounding cable 1.4 m
      - dimensions 40x50x20 mm
      - weight 50 g
      - operating temperature range -10°C ... +55°C

      NOTE: If the protected line can suffer from over-voltages higher then the values above, preliminary security measures must be used.
      Before beginning the installation, the electrical outlet grounding must function properly, and the protected device has to be correctly connected. If grounding fails, the protector and network will not work properly.
      The right grounding
      To avoid overvoltages the protector should be connected to grounding with resistance below 4 ohm. The connection should be screwed down or soldered. It is not allowed to use lightning conductors or gas p

      Produkt manažer:

      Jiří Knop,  +420734310461,  knop@t-cz.com

      Poslat info

      Dotaz k tomuto produktu

      Váš e-mail
      Dotaz

      Nalezli jste jinde na internetu nižší cenu?

      Váš e-mail
      Cena bez DPH
      Cena s DPH
      WWW
      Komentář
      Mám o tento produkt zájem

      Zaslat informaci o produktu známému

      Váš e-mail
      Zaslat na e-mail
      Komentář

      Nalezli jste chybu?

      Popis závady
      Váš e-mail

      Diskuse (0)

      Související produkty

      Instalační kabely Solarix – CAT5E bez problémů splňují a především převyšují požadavky definované v mezinárodních standardech TIA/EIA 568, EN 50173 a ISO 11801 pro CAT5E a jsou proto vhodné i pro provoz těch nejnáročnějších protokolů určených pro struktur

      3 065 Kč 

      bez DPH

      3 709 Kč 

      s DPH

      K provozování našeho webu www.t-cz.com využíváme takzvané cookies. Cookies jsou soubory sloužící k přizpůsobení obsahu webu, k měření jeho funkčnosti a obecně k zajištění vaší maximální spokojenosti. Používáním tohoto webu souhlasíte se způsobem, jakým s cookies nakládáme. Více informací...