0
Košík je prázdný
Infolinka:
+420 734 310 460E-mail:
info@t-cz.com- Kategorie
- Výrobci
Single-mode Patch Cord: ULTIMODE PC-533S (1xFC-1xFC, 9/125)
Zařazení produktu
Poslat info
Dotaz k tomuto produktu
Nalezli jste jinde na internetu nižší cenu?
Zaslat informaci o produktu známému
Nalezli jste chybu?
Diskuse (0)
Podrobnosti o produktu
Distinguishing features:
connectors: 1x FC - 1x FC
one single-mode fiber (G.652.D)
length: 1 m
low loss
ULTIMODE PC-533S patch cord is a section of single-mode fiber optic cable. This 1 meter long optical cable is terminated on both sides with FC connectors.
Thanks to a threaded metal sleeve, the FC connector provides reliable and stable connection. Even an accidental strong external pull does not cause protrusion of the connector from the socket.
ULTIMODE patchcords are characterized by low attenuation and back reflection (reflectance). They use highest quality ferrules. Each patchcord passes individual quality control (inspection of surfaces and measurement of transmission parameters - insertion and return loss).
The single-mode optical fiber with low water peak used in the pachtcords is compliant with ITU-T G.652.D standard. It provides full compatibility and ability to perform quality splices with existing fiber-optic networks. The average attenuation of the fiber is about 0.4 dB/km for 1310 nm, and 0.25 dB/km for 1550 nm. The optical fiber is reinforced by aramid fibers (Kevlar) and covered with PVC sheath.
The optical fibers compliant with ITU-T G.652.D are now among the best standard single-mode fibers on the market. Before introduction of the G.652.D recommendations, optical systems could use one of the three transmission windows with lower attenuation (I: 850 nm, II: 1310 nm, III: 1550 nm). Systems based on optical fibers with low water peak can work in the whole band from 1280 nm to 1650 nm.
Produkt manažer:
Infolinka, info@t-cz.com
Stránky o produktu:
http://www.dipolnet.cz/single-mode_patch_cord_ultimode_pc-533s_1xfc-1xfc_9-125__L3233.htm